Type ESX10-T.-DC 24 V

80 mm

Description

Type ESX10-T. expands our product range of electronic overcurrent protection for DC 24 V applications.

It provides selective protection of all DC 24 V load circuits at a width of only 12.5 mm. This is achieved by active current limitation in the event of a short circuit and overload disconnection from 1.1 times rated current. The ESX10-T features one single trip curve for all types of loads, e.g. capacitive loads up to 75,000 µF, d.c. motors, valve clusters. The integral fail-safe element has been adjusted to the current rating and the connected cable cross section.

The ESX10-T can be snapped onto symmetrical rails, ensuring ease of mounting in multiple circuits.

Technical Data

operating voltage	DC 24 V (18...32 V)
Voltage rating
Current ratings	0.5 A 1 A 2 A 3 A 4 A 6 A 8 A 10 A 12 A
Number of poles	1-pole
Load disconnection	short circuit: typically 100 ms overload: typically 5 s
Current limitation	typically 1.8 x I_N
Signal output	DC 30 V/0.5 A max. (N/C or N/O) DC 10 V/10 mA min. (N/C or N/O) status output, plus-switching (DC 24 V) short circuit-proof, max. 0.2 A
Status indication	1 LED green/orange/red: status/fault
Temperature range
Terminal design	screw terminals
Mounting method	on symmetrical rail
Certificates	ESX10-TA/-TB and -TD: UL 2367 UL 508 UL 1604 (class Ι, div. 2, groups A,B,C,D) CSA C22.2 No: 14 CSA C22.2 No: 142 CSA C22.2 No: 213 (class Ι, division 2) ESX10-TA and -TB: TÜV Süd/ATEX approval IEC/EN 60079-0/-14/-15

Accessories

Order number	Description
AD-TX-EM01	supply module
X21058901/02	Connector bus links -K10 01 = 2.5 mm² black 02 = 1.5 mm² brown
X22200501-03	signal busbar 01 = blue 02 = red 03 = grey
X22200513	jumper
X22261101	busbar red
X22261112	busbar 10-unit-block
X22261134	busbar 3-unit-block
X22261147	busbar 4-unit-block
X22261159	busbar 5-unit-block
X22310801	insulated wire bridge
X22261197	busbar 8-unit-block
X22261122	busbar 2-unit-block
Y30970521-28	labels
Y30970511-14	labels