 |
| |
| Dimensions |
 |
| |
| Internal connection diagrams |
 |
|
|
Single pole remote control circuit breaker (RCCB), temperature compensated, either with or without auxiliary contacts, and featuring a bimetal actuator which trips the circuit breaker mechanism within a specified time under overcurrent conditions. The switching contact latching system is operated by a bi-stable linear motor controlled by electronic circuitry incorporated within the device. Remote control is achieved through the use of a conventional single pole manually operated aircraft style thermal circuit breaker which connects the control input of the RCCB to ground.
With the control circuit breaker (ICU) in the ON position, the RCCB will switch on. When the control circuit breaker is switched off, the RCCB will change to the OFF condition. If power is applied to a previously de-energised RCCB, the device will adopt the same switching status as the control circuit breaker.
If the RCCB trips thermally in the event of a load circuit fault, the electronic circuitry will also cause the control circuit breaker to trip, thereby providing a visual indication through the position of the circuit breaker actuator.
Approved to MIL-PRF-83383. |
| |
| Voltage rating: |
- AC 115 V (400 Hz) AC 104...125
- DC 28 V DC 18...36 V
|
| Current ratings: |
from 5 A to 100 A
|
| Number of poles: |
single pole
|
| Mounting method: |
socket
|
| Terminal design: |
screw terminals
|
| Actuation: |
without actuation
|
| Auxiliary contacts: |
with auxiliary contacts
without auxiliary contacts
|
| Water splash protection: |
without water splash protection
|
| Illumination: |
without illumination
|
| Typical life: |
50,000 operations at 1 x IN
(inductive or resistive) |
| Interrupting capacity Icn: |
AC 115 V (400 Hz): 3,600 A
DC 28 V: 6,000 A |
| Approvals: |
| MIL-PRF-83383 |
|
Download
